Our Company (Singapore Interior Pte Ltd, www.singaporeinterior.com) are specialist in the fitting out of commercial projects, offices, factories, clinics. We design and construct all types of partition, ranging from gypsum board drywall partition, fire rated partition, single / double glazed glass panels, light weight celcon block wall, brickwall to full height tempered glass panels. Suitable for Offices, Showrooms, Factories, Clinics and Retail Outlets use. We have more than 23 years of experience in the renovation industry catering to SME and MNCs.
Speak to our Sales Consultant for any of your enquiry. Our Contact: 63239213. Email: email@example.com
In your planning for construction of partition rooms, do take into consideration the existing M&E services such as air-conditioning and fire protection systems that may be affected;
such as to add / relocate them. Our experienced Sales Consultants / Designers will be able to advise clients on such concern and submit detail proposal and design for clients' approval.
Our QP (Qualified Persons / PE) will prepare for the drawings and submission / lodgement to the Fire Safety & Shelter Department (FSSD) for the interior A&A work.
We trust that our 23 years of experience and track records will be in good position to serve our clients well.
Call us today for a non-obligatory consultation.
Singapore Interior Pte Ltd are HDB and BCA Registered ContractorClass CR06 - Interior Decoration & Finishing Works
* Please continue to read through the rest of our blog for information on our clientele / portfolio, our range of products and services that is catered for Office / Factory design, Clinic renovation.
Pictures below showing Glass panels and glass doors using 12mm thick tempered glass with frosted film stickers.
Pictures are copyright. Do not download without our written permission. All rights reserved.
** Hybrid Of Single And Double Glazed Glass Panels For Cabins Fitted With Glass Doors With Drop Seals For Better Acoustic
Our design and built package includes installation of the electrical, IT cabling, air-conditioning systems, fire protection systems, wall & floor finishes, office furniture production. Complete with drawings and submission to relevant authorities and the building management for the Permit-to-Work.
Pls contact us for more information at Tel: 63239213
Use of Glass at Critical Areas in Buildings
Tempered glass, because of its higher strength and ability to meet load design requirements, is frequently used in both the interior (e.g. parapets) and exterior (e.g. curtain walls, full-height windows and skylight) of buildings. It is often selected as the material for facade of buildings. It is also increasingly being used in other critical areas such as roofs, canopies (including sunshades) and safety barriers in buildings.
Glass used as a Part or Whole of Safety Barrier
Where glass is used as a part or whole of a safety barrier, which is required to comply with Clause H on Safety from Falling in the Fifth Schedule of the Building Control Regulations (on Objectives and Performance Requirements for the Design and Construction of Buildings), it should be laminated glass. The laminated glass must comply with Singapore Standard SS341:2001 – Specification for Safety Glazing Materials for Use in Buildings.
Glass used as a Part or Whole of Building Facade, Roof, Canopy or Other Overhead Glazing
Where glass is used as a part or whole of a building facade, roof, canopy or other overhead glazing (such as sunshade, fins or rain shield) locating at a height of 2.4m or above, it may be float glass, heat strengthened glass, tempered glass, laminated glass or any other types of glass. Regardless of the type used, the glass must comply with Singapore Standard SS341:2001 – Specification for Safety Glazing Materials for Use in Buildings. Specifically, if monolithic tempered glass, heat-soaked tempered glass or any other type of glass that is prone to spontaneous breakage is used here, the design of the building shall provide for suitable protection such as installation of screens or shields, or presence of canopies or ledges, to protect people from injuries in the event of breakage of such glass element.